Blog Page – Winergy Technologies Enerji Verimliliği Danışmanı Winergy Technologies - Enerji Verimliliği Danışmanlığı

Energy Test Measuring Devices

TESTO 440 dP SET

Precise, reliable measurement of all air velocity and IAQ parameters with just one measuring instrument – the testo 440 dP. This multifunction measuring instrument is intuitive and easy to use, thanks to its integrated differential pressure sensor and clearly structured measurement menus. Adjusting air conditioning and ventilation systems, monitoring air quality, and carrying out comfort level measurements are all possible without the hassle of juggling different devices and tools.

  • A measuring instrument for all climate-related parameters
  • Includes a differential pressure sensor: for Pitot tube measurement and monitoring filters
  • Extendible with a wide range of probes
  • Wireless measurement with Bluetooth probes
  • USB interface for exporting measurement reports as CSV files

Testo Sensor LD - Leak Detector

Reliable tracing of leaks: With the testo Sensor LD leak detector, even the smallest leaks can be located from several metres away. When there is a leak, the testo Sensor LD converts the noises generated in the inaudible ultrasonic range into audible frequencies. The sighter function of an integrated laser pointer enables leaks to be located with precision.

Technical Data

  • Working frequency : 40 kHz ± 2 KHz
  • Connections : 3.5mm phone jack for headphones Mains unit port for connecting an external charger
  • Laser : Wavelength : 645 to 660 nm Output : < 1 mW (laser class 2)
  • Operating time : approx. 1.5 h 
  • Operatiing temperature : 0 to 40 °C
  • Storage temperature : -10 °C to +50 °C
  • Standart : Corresponds to the requirements of Class 1 instruments of the “Standard Test Method for leaks using Ultrasonic” (ASTM Int.-E1002-05)

Testo 635 – 2 U – Value Promo Set – Thermohygrometer Set

The testo 635-2 temperature and moisture meter can display min/max/avg values, and calculate the dew point difference between the indoor air and the surface of the wall. This allows you to analyze moisture levels at ceilings and walls. Individually configured characteristic curves ensure the material moisture content is displayed reliably. 

Technical Data 

  • Operating temperature : -20 to +50 °C
  • Storge temperature : -30 to +70°C
  • Battery type : Alkali manganese, mignon, Type AA
  • Battery life : 200h
  • Dimensions : 220x74x46 mm
  • Weight : 428 g
  • Housing material : ABS/TPE/Metal

Testo 868 – Thermal Imager

Areas of application of the testo 868 thermal imager.Detect leaks, identify overheated connections, pinpoint thermal bridges or detect structural defects. The testo 868 thermal imager was developed for applications in daily maintenance and installation work in trade and industry. It enables quick and reliable work when you are detecting defects and carrying out maintenance.

Technical Data

  • Infrared resolution : 160 x 120 pixels 
  • Thermal sensitivity (NETD) : 100 mK
  • Field of view/min focusing distance : 31 ° x 23° / <0.5 m
  • Geometric resolution (IFOV) : 3.4 mrad
  • testo SuperResolution (Pixel/IFOV) : 320 x 240 pixels 2.1 mrad 
  • Image refresh rate : 9 Hz
  • Focus : Fixed focus 
  • Spectral range : 7.5 to 14 µm

Testo 815 – Sound Level Meter

Determine the noise level quickly, easily and reliably in your day-to-day work: with the testo 815 sound level meter.

Technical Data 

  • Measuring range : -32 to +130 dB
  • Frequency rane : 31.5 Hz to 8 kHz
  • Accuracy ± digit : ±1.0dB
  • Resolution : 0.1dB
  • Operating temperature: 0 to +40°C
  • Storage temperature :  -10 to +60°C
  • Battery type : 9V block battery
  • Battery life : 70 h
  • Weight : 195 g
  • Dimensiond : 255x55x43 mm
  • Section meas,ranges : 30 to 80 dB; 50 to 100 dB;80 to 130 dB                                   
  • Time weighting : FAST 125 ms setting/SLOW 1 s setting
  • Pressure dependency : -0.0016 dB/hPa

Testo 300 – Flue Gas Analyzer

The testo 300 flue gas analyzer is ideal for the most important measurements involving heating systems. The testo 300 enables easy measurement of flue gas, draught, pressure, ambient CO and differential temperature.

Technical Data

  • Certification : The testo 300 is TÜV-tested according to 1st German Federal Immission Control Ordinance (BImSchV)
    EN 50379, Parts 1-3
  • Storage temperature : -20 to +50 °C
  • Operating temperature : -5 to +45 °C
  • Charging temperature : 0 to +45 °C
  • Humidity application range : 15 to 90 %RH, not condensing
  • Power supply : Rechargeable battery, USB mains unit
  • Rechargeable battery life : 10 hrs
  • Protection class : IP 40
  • Memory : 1 million measuring values
  • Display : 5.0″ touch display, HD 1280*720 pixels, IPS (160 k)
  • Weight : Approx. 800 g

Testo 550s - Smart Digital Manifold

Testo 550s intelligent digital manifold set; air conditioning systems, cooling systems, commissioning of heat pumps, etc. It is a Bluetooth measuring device with a 2-way valve block used for maintenance, repair and control operations in areas.

Technical Data

  • Operating temperature : -20 to +50 °C
  • Storage temperature : -20 to +60 °C
  • Battery type : 4 AA microcells
  • Battery life : 250 h with no illumination, no Bluetooth® 100 h with illumination and Bluetooth®
  • Auto power off : After 10 minutes when not connected via Bluetooth
  • Dimensions : 210 x 121 x 60 mm
  • Weight : 826 g
  • Protection class : IP54
  • Bluetooth technology/ range : Bluetooth® 5.0/150 m
  • Compatibility : requires iOS 11.0 or newer/Android 6.0 or newer
    requires mobile terminal device with Bluetooth® 4.0

Testo 830-T1 - Infrared Thermometer

The testo 830-T1 infrared thermometer allows efficient, non-contact surface temperature measurements to be carried out. The IR thermometer will leave you well equipped, especially for control readings in trade and industry: The gun-style design is easy to handle and the integrated processor provides accurate measurement results.

Technical Data 

  • Measuring range : –
  • Infrared : -30  to +400 °C
  • Type K (NiCr-Ni) : –
  • Infrared : ± 1.5 °C or 1.5 % of m.v. (+0.1 to +400 °C) or ±2 % of m.v. (-30 to 0 °C) the higher value applies 
  • Type K (NiCr-Ni) : –
  • Resolution : 0.1 °C
  • Measurement rate : –
  • Infrared : 0.5 s
  • Meas.spot marking : 1-point laser 
  • Distance to measurement spot : 10:1

Testo 835-T2 - Infrared Thermometer

The testo 835-T2 also allows you to carry out contact temperature measurements. The thermometer is equipped with a connecting point for a wide range of optional temperature sensors. The temperature sensor can also be used to automatically measure the degree of emission of a particular surface. This makes it easier to carry out subsequent infrared measurements.

Technical Data 

  • Optics : 50:1 (regarding the distance of 2.0 m to measuring object typically) + opening diameter of the sensor (24 mm)
  • Meas. spot marking : 4 point laser
  • Spectral range : 8 to 14 µm
  • Measuring range : -10 to +1500 °C
  • Accuracy ±1 digit : ±2,0 °C or ±1% of m.v.
  • Resolution : 0,1 °C (-10,0 to +999,9 °C ) 1 °C (+1000,0 to +1500,0 °C )
  • Emissivity : 0.10 to 1.00 (steps 0.01)
  • Emissivity table : 20 values storable
  • Laser spot : On / off
  • Memory : 200 values storable
  • Alarm (upper/lower limit) : IR temperature, TC temperature
  • Alarm signal : audible, optical
  • Operating temperature : -20 to +50 °C
  • Storage temperature . -30 to +50 °C
  • Housing material : ABS + PC
  • Battery type : 3 batteries Type AA (or USB operating with PC-Software)
  • Battery life : 25 h (typical 25°C without laser and backlight) 10 h (typical 25°C without backlight)
  • Weight : 514g
  • Display : Dot matrix
  • Auto-Off (disabled for continuous measurement and USB connection) : Backlight: 30 s Instrument: 120 s 
  • Standards : EN 61326-1:2006

Testo 470 - Tachometer

Multiple functions in one tachometer

In the case of optical rpm measurement, you can use the testo 470 tachometer to record how fast a rotating object rotates. Thus, for example, you can check whether motors, shafts and fans are functioning correctly in order to spot any impending defects due to overload at an early stage.

Technical Data 

  • Operating temperature : 0 to +50 °C
  • Storage temperature : -20 to +70 °C
  • Battery type : 2 AA batteries 
  • Battery life : 40 h 
  • Display : 5 figure LCD display, 1-line 
  • Dimensions : 175 x 60 x 28 mm 
  • Weight :190 g

 

Testo 770-1 - Clamp Meter

One of the two pincer arms can be fully retracted into the instrument. This unique grab mechanism means that cables in tight switching cabinets can be easily grabbed. The automatic measurement parameter detection also ensures reliable work: in the current and voltage area, all three instruments detect direct and alternating current and select other parameters such as resistance, continuity, diode and capacitance automatically.

Metrel MI 2883 Energy Master

The MI 2883 Energy Master is a hand-held three phase power quality analyser, specially designed for energy logging and subsequently efficiency calculation. Reducing energy use reduces energy costs and may result in a financial cost saving. Energy Master serves as a perfect tool for long term logging and later post processing of recorded data. Large easy-to-read graphical colour display enabling the user on site analysis and data checks. The handy Quick Set buttons makes the instrument more user friendly and are allowing faster data overview. Advanced PC SW package PowerView3 enables detailed analysis of recorded data, direct reading from the microSD memory card, analysis of long term records and automatic creation of professional test report.

  • 3-voltage channels with wide measurement range: 0 … 1000 Vrms (CAT III / 1000 V);
  • 4-current channels with support for automatic clamp recognition and “on instrument“ range selection;
  • Automatic Smart Clamp detection and Smart Clamp range selection;
  • Compliance with power quality standard IEC 61000-4-30 Class S;
  • Complete power quality analysis according to EN 50160 including signalling and interharmonics;
  • Support for microSD memory card (8-GB supplied with the instrument) up to 32GB;
  • Color-coded input terminals and termi­nal labels to suit your application region;
  • Current clamp auto range selection;
  • Powerful PC SW PowerView3 enables downloading, view, analysis of recorded data and professional report creation.

Ultrasonic Flowmeter

Measures flow rate by calculating the spreading time of an ultrasonic wave in a liquid, going upstream and downstream into a pipe. This flow meter is mostly used to measure the flow rate of homogeneous fluids, also with a quite high percentage of suspended solids.

Technical Data

  • Linearity : 0.5 %
  • Repeatability : 0.2 %
  • Accuracy : ± 1% of reading at rates>0.2 mps 
  • Velocity : ± 32 m/s
  • Pipe size : 15mm – 600mm 
  • Totalizer : 7 – digit totals for  net , positive and negative flow respectively 
  • Liquid Types : Virtually all liquids 
  • Security : Setup values Modification Lockout. Acces code needs unlocking.
  • Communication Interface : RS-232, baud rate: from 75 to 57600.Protocol made by the manufacturer and compatible with that of the FUJI ultrasonic flow meter.User protocol can be made by user requirements.

About us

WINERGY TECHNOLOGIES can determine all energy consumption problems of the building by analyzing more than 110 data for each building with its technological energy measurement devices and the energy analysis simulation developed within it. Thus, the most efficient and correct solutions for energy consumption problems are presented with a holistic approach.

Contact us

tr Türkçe
X